
EtherCAT Branch
Home > Products > EtherCAT Branch> EtherCAT Branch > GW-EC-P04
Product search
Product Catalog


1、Supports the switch cascading function.
2、Based on high-performance EtherCAT ASIC communication chip, faster.
3、Configuration is simple and supports major mainstream EtherCAT master stations.
4、The power supply system supports reverse protection and short circuit protection.
Communication parameter | ||
Model number | GW-EC-P04 | |
Communication protocol | EtherCAT slave station | |
Number of interfaces | 4 * RJ45 (1 in 3 out) | |
Transmission rate | 10/100M speed adaptive | |
Distributed clock | Yes | |
Topological structure | Linear , star, tree, etc | |
Delay | About 1 microsecond per port | |
Ring network redundancy | Yes | |
The network port is hot swapped | Yes | |
Communication distance | ≤100 m (station distance) | |
Isolation mode | Electrical isolation from field floor | |
Transmission medium | Ethernet/EtherCAT CAT5 cable | |
Power supply parameter | ||
Connection mode | 3P Insert and remove the terminal | |
Operating voltage | 18~28V DC | |
System feed current | <150mA | |
The maximum crimp area of the wire | 1.5mm² | |
Maximum crimp area of conductor (AWG) | AWG16 | |
The minimum crimp area of the wire | 0.34mm² | |
Minimum crimp area of conductor (AWG) | AWG22 | |
Strip length | 9mm | |
Basic parameter | ||
Class of protection | IP40 | |
Overall dimensions (H X W X D) | 94 mm X 33 mm X 122 mm | |
Operating temperature | -10 ~ 55°C | |
Storage temperature | -20 ~ 85°C | |
Relative humidity | 95% (non-condensing) | |
Authentication | CE | |
Altitude | Below 2000 m (80kPa) | |
Pollution level | Level 2 | |
Immunity to interference | Power cable 2kV (IEC 61000-4-4) | |
Overvoltage class | II | |
EMC anti-interference level | Zone B,IEC61131-2 | |
Vibration resistance | IEC 60068-2-6 | |
5Hz ~ 8.4Hz, amplitude 3.5mm, 8.4Hz ~ 150Hz, acceleration 9.8m /s2, X, Y, Z | ||
100 minutes in each direction (10 times, 10 minutes each, 100 minutes in total) | ||
Impact resistance | IEC 60068-2-27, 9.8m/s2, 11ms, X/Y/Z, 3 times each in 3 axes and 6 directions | |
LED status | ||
PWR | On: The power supply to the branch is normal | |
Off: The power supply to the branch is abnormal | ||
LINK* | On: The network connection of the corresponding channel is valid | |
ACT* | Blinking: There is data communication on the corresponding channel |