
Functional module
Home > Products > Pull back spring type> Functional module > UE20-1MCOM-485-232
11
Product search
Product Catalog


UE20-1MCOM-485-232
1 channel 485/232 hybrid bus module,
Primary Modbus/RTU station
1, The module supports 1 channel RS485 or RS232 (one of the two options), and the width is only 12 mm
2, Support Modbus RTU protocol, support the main station working mode
3, With the adapter module, Modbus protocol can be converted to other protocols, such as Profinet, EtherCAT, etc
4, The communication operation is independent of the upper layer fieldbus system, and supports full duplex communication up to 115200 baud
5, The shield end can be directly connected with DIN rail
2, Support Modbus RTU protocol, support the main station working mode
3, With the adapter module, Modbus protocol can be converted to other protocols, such as Profinet, EtherCAT, etc
4, The communication operation is independent of the upper layer fieldbus system, and supports full duplex communication up to 115200 baud
5, The shield end can be directly connected with DIN rail
Specification | |
Product | UE20-1MCOM-485/232 |
Number of channels | 1 |
Physical form | RS4851232 bus |
Supports a maximum number of nodes | 32 |
Communication rate | Available baud rate:1200,2400,4800,9600,14.4K,19.2K,38.4K,56K,57.6K,115.2K |
Synchronization message | Support |
Communication protocol | ModbusRTU master station |
Communication timeout detection | Support |
Power Supply Parameters | |
Connection type | Spring terminal blocks |
Working voltage | 5V DC (±10 %) |
System feed current | 76mA |
Mechanical Structure | |
Protection grade | IP20 |
Size(H x W x D) | 100mmX12mmX68mm |
Installation type | 35mm DIN |
Work Environment | |
Working temperature | -10-55℃ |
Storage temperature | -20-85℃ |
Relative humidity | 5~95%RH (non-condensing) |